SUZUKI FORK CONVERSION CHART - Updated

[Gitzy]

Hi all not sure if anyone has posted this previously but i looked everywhere for this info and finally found it, so i thought i'd share it..

http://i493.photobucket.com/albums/rr292/Gitzy84/Suzuki_Fork-Conversion-Details.jpg

[BANDITROD]

thats awsome mate well done that is very sort after info

[suxukifreak]

No GSX1400 :(

[Fish]

Well fuck Des, just add them in will ya!

[bluemk1]

right click, save as

[bluemk1]

now we just need something similar for swingarms and rear wheels :D

good find ol' chap ;)

[latheboy]

And thank you

[fimpBIKES]

and thanks to the hard working people at www.tlzone.net (cos thats where its from)

[Bear]

This should become part of a "Streetfighters Bible". Add in fibreglassing, electrics 101, swingarms, etc etc.

[Jay_G]

is there any reason anyone can think of why a TL top clamp wouldn't bolt onto a Hayabusa lower clamp setup? i am thinking it could be a cheap way of getting rid of the shitty busa top clamp.

[Gitzy]

quote:Originally posted by Jay_G

is there any reason anyone can think of why a TL top clamp wouldn't bolt onto a Hayabusa lower clamp setup? i am thinking it could be a cheap way of getting rid of the shitty busa top clamp.


The fork centres, diameter and offset appear to be all in sync so i couldnt see why not Jay_G... agree with the top clamp looks a little largish with the 4 holes, unless you do what CamBandit17 from Customfighters.com did and blank out holes with bar end caps... plus you have added benefit of moving bars forward or back and inch or so.. i'd prob still go TL clamp though

this is CamBandit17's 05 Bandit 12
http://i493.photobucket.com/albums/rr292/Gitzy84/001031.jpg

[Gitzy]

http://www.asfphotos.com/upload/1284151081.jpg

[NoZ]

how do i rob it?

[bluemk1]

quote:Originally posted by NoZ

how do i rob it?


right click, save as?

[oldskool]

Now all ya need is the front ends and head stems that go into new and old Suzukis

[bluemk1]

hmm typical, the bits of information i need are blank.

does anyone know if a 2009 busa wheel and rotors will work with my 2006/7 750 forks, calipers?

[themetal750]

hi there does anyone know if there is a chart for the later model bikes i have a 2009 gsxr 1000 and im trying to work out a triple clamp for fat bar set up and may find this information veeery handy when coming time to do it all :)

[Gitzy]

http://i1359.photobucket.com/albums/q786/gitzyfighter/Fighter%20Charts/forkconversiondetails_zps1a446e3a.jpg

[Gitzy]

Thats as updated as I have found it..

[Dynomutt]

Also be aware the GSXR600K0 to K3 uses 45mm diameter RWU forks, not the USD forks as listed. The GSXR750Y to K3 does use Showa USD forks which are 50mm top and 54mm bottom though.