Blogs on how to do things from the guys that know how!
How to "recalculate speedo readings with non-standard sporckets" Submitted by Exben (Ben Shaw - Extreme Creations) ...
How to "Convert a Diaphragm clutch unit to a Coil Spring Clutch unit" - Submitted by Deano (Dean Molloy) ...
How to "Make a Shorty can" Submitted by EXBEN (Ben Shaw - Extreme Creations) ...
This front end conversion applies to all Gen 1 B12 Bandits to accept a GSXR 600/750 K4/K5 USD Radial Fork setup retaining the original B12 Front wheel , Brake rotors, steering stem and steering head bearings.. What you will need to complete this task: * Generation 1 Suzuki GSF1200 1996 – 2000 Model NOTE: The front ends for the Suzuki GSXR 600/750 K4/K5 are all Identical this includes yokes, forks, calipers and axle are ALL IDENTICAL so this means if you ...
Updated 31-12-2011 at 07:29 PM by Gitzy
Now I have my mould I need to prep it ready for fiberglassing. I started with 240 wet and dry then went to 400, 600, and finished up with 1200 then T cut to get it as shiney inside as I could Now ten coats of wax. Well, the mold has had ten coats of wax, and its ready for P.V.A. Because the surface has been ...